Description

The CS2-TM (Pulse Input) is innovation totalizer. ADTEK builds in high technology with wide input range from 0.01Hz~ 140.00KHz with auto-range function at same unit. There are three setting modes for K factor, 1/K factor and flow speed to match the difference output description of flow-meters. The Totalizer provides high accuracy measurement, display, control and communication (Modbus RTU mode) of Pulse from Flowmeter or encoder, proximity switch, photo switch for length control.

There are two display screen and 3 external control input (DI) in standard and the optional 4 Relay, 1 Analogue, 1 Pulse and RS485 port available. They are also supporting fantastic control function as like as N, R, C mode for totalizer and batch control.

Features

■ Measuring Pulse auto range 0.01Hz~100KHz(optional:140KHz); Contact / NPN / PNP / Voltage Pulse can be switch on rear of meter

■ Accuracy of immediate Value: ± 0.005%; Decimal Point auto moving according to input frequency

■ Dual display screen for 10 digital Totalizer or Batch counter + 4 2/3 Immediate Value (PV) or 6 digital Batch

programmable.

■ 4 relays can be individual programmed to relative immediate value (PV) or totalizer / batch / batch counter.

■ Relative to Immediate Value (PV): Functions settable Energized Mode Hi / Lo / Hi (Lo) Hold / DO / Go,

Hysteresis‚ Energized Delay, De-energized Delay, Energized latch or energized by RS485 command.

■ Relative to Totalizer / Batch / Batch Counter: N / R / C mode and energized time programmable.

■ 3 external control input can be individual programmed for immediate value (PV) or totalizer / batch / batch

counter.

■ Immediate Value (PV): PV Hold / Reset for Maxi. (or Mini.) Hold / DI / Reset for Relay Energized Latch

■ Totalizer / Batch / Batch Counter: Reset, Gate

■ Analogue Output and Pulse Output available in option

■ RS485(Modbus RTU mode), Baud Rate is up to 38400bps

■ Comply to CE standard & RoHS