HCC, Hirschmann converter is equipped with LED display, and it can be applied on
4~20mA output indicator with 2-wire transmitter. Also, it can convert 4~20mA signal to be RS
485 output. It provides high-accurated measurement, and it is easy to operate.
Hirschmann connector will help with electric outgoing.
FEATURE
● Transducer and CT combined for AC Current / Volt / Frequency, 1P2W, 3P3W
Watt / Var, 1P2W, 3P3W, 3P4W DC Current / Volt
● Direct 300A max measured for AC or DC
● Output signal 4~20mA, 0~10V
● 4~20mA (Loop Powered DC 24V)
● DC Powered (or Loop)
● Small size, Easy installation
1. Measuring high DC voltage, suitable for solar system voltage measurement
2. Output range programmable by DIP switch
3. Low output ripple
4. Resistant to high impulse voltage & surge protection
5. High stability & low cost
CPT Power transducer provide single phase, 3 phase multiple parameters (such as voltage, current, active power, reactive power ,apparent power, power factor, frequency, effective energy)input conversion, display and remote communication function.
Standard equip with 1 RS485 communication output (Modbus RUT Mode), 1 Relay and 2 pulse outputs, optional 2 sets /4 sets of analogue output, comply to the needs in power management, remote input and output, alarm, remote controls applications.
■Features
●Input 1P2W,1P3W﹔3P3W,3P4W (Balanced/Unbalanced) load system’s active power, reactive power, apparent power and electric energy (Watts-Hr) etc parameters.
●1 set relay(SPDT) output, with 3 variable setting (R1.1/R1.2/R1.3), each react to setting parameters V.AVG/I.AVG/FREQ/P.TL/Q.TL/ S.TL / PF.AVG / AE.TL / RE.TL / VA / VB / VC / IA / IB / IC / PF-A / PF-B / PF-C / P-A / P-B / P-C / Q-A / Q-B / Q-C / S-A / S-B / S-C, having relay function : Hi / Lo / Hi Hold / Lo Hold / OFF; further advance function , start delay, hysteresis, time delay, reset delay etc.
●4 analogues output same as relay setting parameters.
●Output range: Current 0~10mA / 0~20 mA / 4~20 mA / 4~12~20 mA
●Output range: Voltage 0~5V / 1~5 V / 0~10 V / 0~2.5~5 V / 1~3~5 V / 0~5~10 V / ±5V / ±10V
●2 set of open collector pulse for Kilowatt-Hour and Kvar-hour output, maximum frequency 1000Hz.
●Outer case wall mounting or din rail mounting(EN500022)
●CE approved.
■Applications
●Motor control
●Panel power monitoring
●Power consumption monitor and control
●Power distribution system
●Intelligent building & automation power management system
●Power testing equipment
● 1Phase(1 I/O), 3Phases(3 I/O)
● Precision measurement even for distorted waveform
● Self powered or Loop powered models available
● Output signal programmable by dip-switch
● Low output ripple
● High impulse & Surge protection
● High stability & low cost
● CE
● Measuring Frequency
● Output range programmable by dip-switch
● Low output ripple
● High impulse & Surge protection
● High stability & low cost
● CE
● Measuring Watt, Var or Watt & Var
● 1P2W, 1P3W, 3P3W, 3P4W Balanced or Unbalanced systems
● Precision measurement even for distorted wave
● Output range programmable by dip-switch
● Low output ripple
● High impulse & Surge protection
● High stability & low cost
● Measuring Power Factor or Phase Angle
● 1P2W, 3P3W, 3P4W Balanced or Unbalanced systems
● Precision measurement even for distorted wave
● Output range programmable by dip-switch
● Low output ripple
● High impulse & Surge protection
● High stability & low cost
● CE
● Measuring Watt-Hr, Var-Hr or Watt-Hr & Var-Hr
● 1P2W, 1P3W, 3P3W, 3P4W Balanced or Unbalanced systems
● Precision measurement even for distorted wave
● Output range programmable by dip-switch
● High impulse & Surge protection
● High stability & low cost
● CE
● Measuring Watt & Watt-Hr or Var & Var-Hr 1P2W, 1P3W, 3P3W, 3P4W Balanced or Unbalanced systems
● Precision measurement even for distorted wave
● Output range programmable by dip-switch
● Low output ripple
● High impulse & Surge protection
● High stability & low cost
● CE
Product designed using Hall Effect theory with fast output response characteristic. With Clamp like structure, it is safe and convenience to install in any kind of current measuring system. Widely use in DC/AC current including current bipolar and DC pulse conversion for monitoring and control.
