Description
VAM Voltage & Current Meter is equipped with high accuracy measurement for dual channels(isolated), dual display, and communication of 0~600V and 0~10A for DC/AC/TMRS; compact dimension: 48 x 96mm
Also, it provides arithmetic operations such as addition, subtraction, multiplication, and division with low pass / high pass transformation to meet the requirement of testing equipment.
It has 4 relay outputs, 1 analog output, and 1 RS-485(Modbus RTU Mode) interface; they provide many functions such as control, alarm, re-transmission, and communication.
Features
■ Measuring voltage for DC / AC / TRMS, 0~100mV/~600V, and current 0~199.99μA/~10A.
■ Arithmetic operations involve addition/ subtraction/ multiplication/ division with low pass / high pass transformation.
■ 4 relay can be cross-programmed to be a Hi / Lo / Hi Latch / Lo Latch / Go energized with Start Delay / Hysteresis / Energized & De-energized Delay functions, or to be a remote control.
■ Able to additionally purchase one or more of analog output or RS-485 communication port
■ High-voltage Input module is optional for metering high-voltage signal.
Applications
■ Testing equipment for voltage/current measurement; work with PC/PLC for alarm, control and communication.
■ 4 relay functions involving Hi / Lo / Go with on and off delay time from 0.0(s)~ 9(m):59.9(s).
■ DC watt measuring in solar energy to communicate with PC/PLC; Input: 1 Adc & 2Vdc.
■ Voltage/ current measurement, alarm, and remote I/O for inspection equipment; communication with PC/PLC.
■ 4 relays can be set as Hi / Lo / Hi latch / Lo latch / DO(remote control by PC/PLC).
Description
CS2-VA Voltage/Current Indicator is designed with high accuracy measurement, display and communication. The communication range is 0~600V or 0~10A for DC/AC/TRMS.
This meter goes with 4 Relay outputs, 3 External Control Inputs, 1 Analog output and 1 RS-485 (Modbus RTU Mode) interface providing versatile functions such as control, alarm, transmission and communication. They can be widely applied in machinery, equipment inspection, production control, data collection, central monitoring, and overload protection for distribution board.
Features
■ Measuring Voltage 0~600V or Current 0~10A for DC / AC / TRMS
■ 4 relay outputs can be individually programmed to be Hi /Lo /Hi Hold /Lo Hold /Go /DO providing the function such as energized with Start Delay/ Hysteresis / Delay On / Delay Off functions, or Remote Control.
■ Analog output and RS-485 communication port are included.
■ 3 external control inputs can be individually programmed to be Relative PV (Tare) / PV Hold / Maximum or Minimum Hold / DI (remote monitoring) / Reset for Latching Relay.
■ High-voltage Input module is optional for metering high-voltage signal.
■ CE & RoHS Certification
Applications
■ Testing Equipment and Volt/Current Measuring. Connection with PC/PLC for alarm, and communication control.
■ 3 DI functions can be programmed to be Maximum/Minimum Reset, PV hold and Relative PV; 4 Relay outputs can be programmed to be Hi / Lo / Go for delay-action switch. The setting time from 0.0(s)~ 9(m):59.9(s).
■ Voltage or Current Measuring for MCC panel, Machinery, Switch gear. Connection with PC/PLC for Alarm and Remote I/O.
■ 4 Relay outputs can also be programmed to be Hi /Lo /Hi hold /DO( remote control by PC/PLC).
■ 3 DI functions can also be programmed to be Reset for Latching( remote monitoring by PC/PLC).
Description
CS1-VA economic type Voltage / Current Indicator was designed with high
accuracy measurement, display and communication. The communication
range is 0~600V or 0~10A for DC / AC / TRMS.
In addition, you can select 1 set of 1 Relay output, or 1 Analog output, or 1 RS-485 (Modbus RTU Mode) to create new function such as control, alarm, transmission or communication that can be widely applied in industrial testing.
Features
■ Measuring Voltage 0~600V or Current 0~10A for DC / AC / TRMS
■ Option available 1 of 1 relay, 1 analogue output or RS485(Modbus RTU mode)
■ 1 relay can be programmed individual to be a Hi / Lo / Hi Latch / Lo Latch energized with Start Delay /
Hysteresis / Energized & De-energized Delay functions.
■ Analogue output or RS 485 communication port in option
■ CE Approved & RoHS
Applications
■ Testing Equipment and Volt/Current Measuring. Connection with PC / PLC for alarm, control, communication.
■ Voltage or Current Measuring for MCC panel, Machinery, Switch gear. Connection with PC/PLC for Alarm and Remote I/O.
Description
CS3-VA Voltage/Current Meter provides high accuracy measurement,
display and communication. Also, it can be installed at small space because
of its miniature size (dimension, 24x48mm).
The meter contains 2 Relay outputs, 1 External Control Input, 1 Analog
output or 1 RS-485 (Modbus RTU Mode) interface with versatile functions such
as control, alarm, re-transmission or communication.
Features
■ Measuring Voltage 0~300V or Current 0~20mA for DC / AC(average)
■ 2 relay can be programmed individual to be a Hi / Lo / Hi Latch / Lo Latch energized with Start Delay / Hysteresis / Energized & De-energized Delay functions, or to be a remote control.
■ Analogue output or RS 485 communication port available in option
■ 1 external control input can be programmed to be Relative PV(Tare) / PV Hold / DI (remote monitoring) / Reset for Maximum or Minimum Hold / Reset for Relay Energized Latch….
■ CE Approved
Applications
■ Testing Equipment and Volt / Current Measuring. Connection with PC / PLC for alarm, and communication control.
■ Voltage or Current Measuring for MCC panel, Machinery, Switch gear. Connection with PC / PLC for Alarm and
Remote I/O.
■ Waveform capture and recording
Features
■ Measuring: DCA, DVC, ACA, ACV
■ Accuracy: ±0.1%(DB), ±0.2%(AC)
■ Display range: -1999~9999
■ Dimension: 1/32 DIN (48x24mm)
■ High Stability and reliability
Description
CM2-VA Indicator has been designed in simple operation and 4 digital 20.0mm LED displays with economic cost.
They are can be programmed by buttons that are hidden in front panel
They are also available to option relay output and an analog output or RS-485(Modbus RTU Mode) communication
Features
■ Measuring AC / DC Voltage 50mV~600V、AC / DC Current 1.999mA~10A
■ AC measurement input adopts fast sampling and integration technology, and the displayed value is directly true root mean square(TRMS)
■ The operation buttons are built-in to prevent users from arbitrary operation or incorrect setting, which may cause abnormal operation of the equipment
■ The display value can be adjusted slightly with the "field measurement signal"
■ The output can option relays and analog output or RS-485 (Modbus RTU mode)
■ Relay function in addition to start delay, active delay, delay off and active hold
■ Analog output voltage signal range can be switched (0~10V/0~5V/1~5V) or current signal range can be switched (0~10mA/0~20mA/4~20mA)
■ The analog output signal is free to set the corresponding display range (Span-50%) and can be fine-tuned on-site
■ On board terminal design, no quality issue; installation depth is only 72mm
Applications
■ Testing Equipments for Volt/Current Measuring
■ MCC panel, Machinery, Switch gear... for Voltage or Current Measuring
Description
CM1 series Indicator has been designed in simple function and 4 digital 20.0mm LED displays with economic cost.
They can be programmed by tact switches that are hidden in backside of front bezel.
They are also available option of 2 Relay outputs, 1 Analog output or 1 RS485 (Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission or communication for a wide range of industrial applications.
Features
■ Measuring AC / DC Voltage 50mV~600V、AC / DC Current 1.999mA~10A
■ The operation buttons are built-in to prevent users from arbitrary operation or incorrect setting, which may cause abnormal operation of the equipment
■ The display value can be adjusted slightly with the "field measurement signal"
■ The output can option relays or analog output or RS485 (Modbus RTU mode)
■ Relay function in addition to start delay, active delay, delay off and active hold
■ Analog output voltage signal range can be switched (0~10V/0~5V/1 ~5V) or current signal range can be switched (0~10mA/0~20mA/4~20mA)
■ The analog output signal is free to set the corresponding display range (Span-50%) and can be fine-tuned on-sit
■ On board terminal design, no quality issue; installation depth is only 73mm
Applications
■ Testing Equipment for Volt/Current Measuring
■ MCC panel, Machinery, Switch gear... for Voltage or Current Measuring
Description
CS2-F Frequency Indicator is equipped with high accuracy measurement, display and communication of frequency. It features user-defined range of frequency input, 0.01Hz~ 100KHz (optional purchase for ~140KHz), and the display resolution will change based on the maximum input frequency.
It allows to purchase optional functions up to 4 relay outputs, 3 digital inputs, 1 analog output and 1 RS-485(Modbus RTU Mode) communication port, and such diverse interface provides many functions to control, alarm, remote communication, and relevant application.
Features
■ Measuring frequency range: 0.01~100KHz; ~140KHz (optional purchase); voltage pulse or sine wave (specified spec)
■ Accuracy: ± 0.005%; display range: 0~99999; automatically move the decimal point according to the setting range
■ 4 relays can be programmed individually to be a Hi / Lo / Hi Hold / Lo Hold / Go energized with Start Delay / Hysteresis / Energized & De-energized Delay functions, or to be a remote control
■ Optional purchase: analog output and RS-485 communication port
■ 3 E.C.I. digital inputs can be programmed individually to be Tare (Relative PV) / PV Hold / Maximum or Minimum Hold / DI (remote monitoring) / Reset for Relay Energized Latch
■ CE Approved & RoHS
Applications
■ MCC panel, switch gear... for frequency measurement.
4 relays can be programmed to be Hi / Lo / Hi Hold / Lo Hold / DO (remote control by PC/PLC).
3 DI can be programmed to be reset of relay energized and remote monitoring by PC/PLC.
■ Testing equipment with PC/PLC for frequency measurement, alarm, control, and communication.
3 DI can be programmed to be maximum/minimum hold, PV hold and relative PV.
Description
CS1-F economic Frequency Indicator is equipped with high accuracy measurement, display and communication of frequency.
It features user-defined range of frequency input, 0.01Hz~ 100KHz (optional purchase for ~140KHz), and the display resolution will change based on the maximum input frequency.
It allows to purchase one optional set of relay output, analogue output, or RS-485(Modbus RTU Mode) communication port, and such diverse interface provides many functions to control, alarm, remote communication, and relevant application.
Features
■ Measuring frequency range: 0.01~100KHz; ~140KHz (optional purchase); voltage pulse or sine wave (specified
spec).
■ Accuracy: ± 0.005%; display range: 0~99999; automatically move the decimal point according to the setting range.
■ Optional to purchase only one of them: 1 relay output, 1 analogue output, or RS-485 communication port
■ 1 relay can be programmed individually to be a Hi / Lo / Hi Hold / Lo Hold / Start Delay / Hysteresis /
Energized & De-energized Delay functions.
■ CE Approved & RoHS
Applications
■ MCC panel, switch gear... for frequency measurement; work with PC/PLC for remote I/O control and alarm
■ Testing Equipment for Frequency Measuring, Alarm or Communication with PC/PLC 3 DI can be programmed to be reset of relay energized and remote monitoring by PC/PLC.
Description
CM1-F is an economical and simple frequency meter with a 20mm 5-digit LED display, and the display range can be set by pressing the button. Anti-interference design, reliable quality, simple installation and operation.
At the same time, it has 2 sets of relay output or 1 set of analog output or 1 set of RS485 (Modbus RTU mode) communication ports for selection.
The built-in design of the operation buttons can avoid human mis-operation and is suitable for various mechanical use.
Features
■ The frequency input is 1Hz~6KHz, the input signal is a sine wave
■ The operation buttons are built-in to prevent users from arbitrary operation or incorrect setting, which may cause abnormal operation of the equipment
■ The output can option relays or analog output or RS485 (Modbus RTU mode)
■ Relay function in addition to start delay, active delay, delay off and active hold
■ Analog output voltage signal range can be switched (0~10V/0~5V/1 ~5V) or current signal range can be switched (0~10mA/0~20mA/4~20mA)
■ The analog output signal is free to set the corresponding display range (Span-50%) and can be fine-tuned on-site
■ On board terminal design, no quality issue, installation depth is only 73mm
Applications
■Sine wave frequency measurement and PC/PLC for communication control or alarm
Description
CSN-VA is an economic & simple indicator, large LED display 20.0mm height, anti-jamming design, reliable quality and easy installation. Multiple range of input models, you can specify AC or DC voltage / current , for all general measurement requirements.
Features
■ User-adjustable zero, coarse and fine-tuning three wired potentiometers, direct adjustment of on-site display
■ 20.0mm large high brightness LED display; straight terminal design, no quality issue; installation depth of only73mm
Description
CM3-VA9 is a multifunctional 3-phase voltage/current meter.
It features 3 phase voltage/current, display range set with frony keys, anti-interference, display, and easy installation for regular voltage/current measurement.
Besides, it offers multiple I/O functions, 6 relay outputs, 3 analog outputs and 1 RS-485 communication port (Modbus RTU Protocol).
Features
■ Measurement: True RMS
■ Measuring AC Voltage 0~333mV/~19.99V/~600.0V, AC Current 0~1A/~5A
■ Setting display range and alarm with front keys according actual needs
■ Terminal implant design avoid loose connection
■ 96x96 panel size, installation depth only 78.2mm
Applications
■ MCC panel, Machinery, Switch gear, Testing Equipment
■ Motor control panel, mechanical equipment, voltage switch box
Description
CM3-VA7 is a multifunctional 3-phase voltage/current meter.
It features 3 phase voltage/current, display range set with frony keys, anti-interference, display, and easy installation for regular voltage/current measurement.
Besides, it offers multiple I/O functions, 3 relay outputs, 1 analog output and 1 RS-485 communication port (Modbus RTU Protocol).
Features
■ Measurement: True RMS
■ Measuring AC Voltage 0~333mV/~19.99V/~600.0V, AC Current 0~1A/~5A
■ Setting display range and alarm with front keys according actual needs
■ Terminal implant design avoid loose connection
■ 72x72 panel size, installation depth only 78.2mm
Applications
■ MCC panel, Machinery, Switch gear, Testing Equipment
■ Motor control panel, mechanical equipment, voltage switch box
