HOME  /  PRODUCTS  /  Process Control  /  Digital Panel Meter
Digital Panel Meter
CFIA-40

    1. Using LED to display, and able to be used in dark environment

    2. No external power needed

    3. Able to display measured value like pressure , temperature and depth etc

    4. Display solution 1/9999

    5. Isolated alarm open drain output

    6. Voltage drop will below 4 volt

CM1-TC

    CM1-TC Thermocouple Temperature Meter has been designed in simple function and 4 digital 20.0mm LED displays with economic cost.

    They are can be programmed by tact switches that are hidden in front panel.

    They are also available to option relay output or an analog output or RS485(Modbus RTU Mode) communication.

     

    ■Features

    ˙Measuring thermocouple type: K、J、E、T、B、R、S、N

    ˙Unit can be set to ℃ or ℉

    ˙The operation buttons are built-in to prevent users from arbitrary operation or incorrect setting, which may cause abnormal operation of the equipment

    ˙The display value can be adjusted slightly with the "field measurement signal"

    ˙The output can option relays or analog output or RS485 (Modbus RTU mode)

    ˙Relay function in addition to start delay, action delay, re-return delay: in addition, more "action hold" function

    ˙Analog output voltage signal range can be switched (0~10V/0~5V/1 ~5V)

    or current signal range can be switched (0~10mA/0~20mA/4~20mA)

    ˙The analog output signal is free to set the corresponding display range (Span-50%) and can be fine-tuned on-site

    ˙The input type and display range of the thermocouple can be arbitrarily set according to the site requirements

    ˙On board terminal design, no quality issue; installation depth is only 73mm

     

    ■Applications:

    ˙With thermocouple sensor for temperature display and control.

    ˙Temperature measurement, display and communication for data collection.

CM1-TR

    CM1-TR RTD Temperature Meter has been designed in simple operation and 4 digital 20mm LED display with economic cost.

    They are can be programmed by buttons that are hidden in front panel.

    They are also available to option relay output and an analog output or RS485(Modbus RTU Mode)communication.

     

    ■Features:

    ˙Measuring RTD type: PT100Ω / PT1000Ω

    ˙Unit can be set to ℃ or ℉

    ˙The operation buttons are built-in to prevent users from arbitrary operation or incorrect setting, which may cause abnormal operation of the equipment

    ˙The display value can be adjusted slightly with the "field measurement signal"

    ˙The output can option relays or analog output or RS485 (Modbus RTU mode)

    ˙Relay function in addition to start delay, active delay, delay off and active hold

    ˙Analog output voltage signal range can be switched (0~10V/0~5V/1 ~5V)

    or current signal range can be switched (0~10mA/0~20mA/4~20mA)

    ˙The analog output signal is free to set the corresponding display range (Span-50%) and can be fine-tuned on-site

    ˙On board terminal design, no quality issue; installation depth is only 73mm


    ■Applications

    ˙With RTD (PT100Ω / PT1000Ω) sensor for temperature display and control.

    ˙Process alarm or communication for data collection.

A6-PR

    A6-PR 6 Digits Process Meter has been designed with high accuracy measurement, 6 digit display, flexible I/O functions and communication port for process measuring application.

    There are also build in 4x External Control Inputs, and can option 4x Relay outputs, 1x Analog output and 1x RS485 (Modbus RTU Mode) communication port with multi-functions such as control, alarm, re-transmission and communication for a wide range of industrial applications.

    There was designed the zero tracking and stable tracking function in programming level.

    According to the application, user can set the function to get the suitable reading.

A6-SG

    A6-SG weighing controller has been designed with high accuracy measurement (24bit A/D), 6 digital display, flexible I/O functions and communication port for general weighing application.

    They are also build in 4 Relay outputs, 4 External Control Inputs, 1 Analogue output and 1 RS485 (Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission and communication for a wide range of industrial applications.

    They was designed the tracking zero and tracking stable function in programming level. According to the system, user can set the function to get the suitable reading.

    According the purpose, the 4 relays can be selected individual for feeder, discharge, peak, or alarm in 7 control modes.

CSN Series

    CSN Series 3 1/2 Digital Process Meter is a simple type of economic Panel Meter, and its large LED display with 20.0mm and anti-jamming design, quality, reliable, easy to install.

    Full range can be specified DC voltage / current, thermal resistance , load cell, potentiometer , Resistance and

    pulse signals such as the general measurement requirements.

     

    ■ Features:

    • Users can adjust the zero point. coarse adjustment and fine adjustment 3 potentiometer, directly in the field to adjust the displayed value
    • 20.0mm large highlight LED display; design of Straight into the terminal, no access to undesirable questions; Installation depth of only 73mm

     

CM1-PR

    CM1-PR 4 Digits Process Meter has been designed in simple function and 4 digital 20.0mm LED displays with economic cost.

    They are can be programmed by tact switches that are hidden in backside of front bezel.

    They are also available option of 2 Relay outputs, 1 Analogue output or 1 RS485(Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission or communication for a wide range of industrial applications.

     

    Features:

    ˙Measuring 0(1)~5V/0~10V, 0~10mA/0(4)~20mA ( or 2 wire sensor with 24Vdc excitation supply )

    ˙Optional DC24V excitation power for 2 wire sensor

    ˙The operation buttons are built-in to prevent users from arbitrary operation or incorrect setting, which may cause abnormal operation of the equipment

    ˙The display value can be adjusted slightly with the "field measurement signal"

    ˙The output can option relays or analog output or RS485 (Modbus RTU mode)

    ˙Relay function in addition to start delay, active delay, delay off and active hold

    ˙Analog output voltage signal range can be switched (0~10V/0~5V/1 ~5V)

    or current signal range can be switched (0~10mA/0~20mA/4~20mA)

    ˙The analog output signal is free to set the corresponding display range (Span-50%) and can be fine-tuned on-site

    ˙On board terminal design, no quality issue; installation depth is only 72mm

     

    Applications:

    ˙2 wire sensing transducers as like as pressure, level and so on….

    ˙Process alarm or communication for data collection.

     

     

CM1-RL

    CM1-RL series provides a simple economic programmable speed/velocity table, it 20.0mm, 5-digit LED display, press the key to set the display range and its anti-jamming design and reliable quality, simple installation, you can meet the needs of general measurement of speed/velocity.

    This instrument also has 2 group relay outputs, 1 analog output, or 1 groups RS485 (Modbus RTU mode) communication features three a (More features please refer to page description). Operation press the inner design, the more human-no action can be avoided, especially suitable for all kinds of machinery used.

CM1-CT

    CM1-CT multifunction counter(position) display controller, is design to have 2 pulse input, for proximity switch, photoelectric sensor, encoder etc.. Counting increase or decrease, positioning batch count etc.. display, with External input and Modbus communication port.

    Multiple types of input mode, trip mode setting to fulfil easy usage and requirement for counter controller. For different requirement, the meter can be with 2 relay or 1 Analogue output or 1 RS485(Modbus RTD mode) communication. (Choose 1 kind of output from the 3 options)

CM2-PR

    CM2-PR Process Meter has been designed in simple operation and 4 digital 20mm LED display with economic cost.

    They are can be programmed by buttons that are hidden in front panel.

    They are also available to option 2 relay output and an analog output or RS485(Modbus RTU Mode) communication.

     

    Features

    ˙Measuring 0(1)~5V/0~10V, 0~10mA/0(4)~20mA

    ˙Optional DC24V excitation power for 2 wire sensor

    ˙The output can option relays and analog output or relays and RS485 (Modbus RTU mode)

     

    Applications

    ˙2 wire sensing transducers as like as pressure, level and so on….

    ˙Process alarm or communication for data collection.

CM2-TR

    CM2-TR RTD Temperature Indicator has been designed in simple operation and 4 digital 20mm LED

    display with economic cost.

    They are can be programmed by buttons that are hidden in front panel.

    They are also available to option relay output and an analog output or RS485(Modbus RTU Mode)

    communication.

CM2-TC

    CM2-TC Thermocouple Temperature Indicator has been designed in simple operation and 4 digital

    20mm LED display with economic cost.

    They are can be programmed by buttons that are hidden in front panel.

    They are also available to option relay output and an analog output or RS485(Modbus RTU Mode)

    communication.

CS1-PR

    CS1-PR economic type Process Indicator has been designed with high accuracy measurement, display and communication of DC signal 0~10V and 4(0)~20mA.

    They are also available 1 option of 1 Relay outputs, 1 Analogue output or 1 RS485(Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission or communication for a wide range of industrial applications.

CS1-RL

    CS1-F economic type Frequency Indicator has been designed with high accuracy measurement, display and communication of Frequency.

    ● The innovation feature is auto-range input from 0.01Hz~ 100KHz (option ~140KHz) and the display resolution will auto-change to show the highest according to input frequency.

    They are also available 1 option of 1 Relay outputs, 1 Analogue output or 1 RS485 (Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission or communication for a wide range of panels and testing applications.

CS1-RS

    CS1-RS economic type Resistance Indicator has been designed with high accuracy measurement, display and communication of Ohm(2 wire) as like as Coil of motor or transformer.

    ● The meter supports Field Calibration function. It can be calibrated with sensor (Resistance) to meet machinery structure.

    They are also available 1 option of 1 Relay outputs, 1 Analogue output or 1 RS485 (Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission or communication for a wide range of machinery and testing equipments applications.

CS1-PM

    CS1-PM economic type Potentiometer Indicator has been designed with high accuracy measurement, display and communication of resistance (3 wires) as like as Positioner.

    ● The meter supports Field Calibration function. It can be calibrated with sensor (Potentiometer) to meet machinery structure.

    They are also available 1 option of 1 Relay outputs, 1 Analogue output or 1 RS485 (Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission or communication for a wide range of machinery and testing equipments applications.

CS1-SG

    CS1-SG economic type Strain Gauge/Load Cell Indicator has been designed with high accuracy measurement, display and communication of DC signal 0~1.0/~4.0mV or 0~10.0/~40.0mV.

    ● The meter supports Field Calibration function. It can be calibrated with sensor (Load Cell/Strain Gauge) to meet machinery structure.

    They are also available 1 option of 1 Relay outputs, 1 Analogue output or 1 RS485 (Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission or communication for a wide range of industrial applications.

CS1-T

    CS1-T economic type Temperature Indicator has been designed with high accuracy measurement, display and communication of Thermocouple or Pt100Ω.

    They are also available 1 option of 1 Relay outputs, 1 Analogue output or 1 RS485(Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission or communication for a wide range of machinery and testing equipments applications.

CS1-8

    CS1-8 has been designed for remote display by RS485(Modbus RTU Mode) interface

CS2-PR

    CS2-PR Process Indicator has been designed with high accuracy measurement, display and communication of DC signal 0~10V and 4(0) ~20mA with square root function.

    They are also build in 4 Relay outputs, 3 External Control Inputs, 1 Analogue output and 1 RS485 (Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission and communication for a wide range of industrial applications.

CS2-RL

    CS2-RL RPM Indicator has been designed with high accuracy measurement, display and communication of pulse (Frequency).

    ● The innovation feature is auto-range input from 0.01Hz~ 100KHz (option ~140KHz) and the display resolution will auto-change to show the highest according to input frequency.

    They are also building in 4 Relay outputs, 3 External Control Inputs, 1 Analogue output and 1 RS485(Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission and communication for a wide range of testing and machinery control applications.

CS2-CT

    The CS2-CT provides high speed and multifunction, counting, control and communication (Modbus RTU mode) of Pulse from flow meter or encoder, proximity switch, photo switch for length control.

    There are 3 external control input (DI) in standard and the optional 4 Relay, 1 Analogue,and RS485 port available. They are also support N, R, C mode for totalizer control.

CS2-MC

    The CS2-MC provides dual input(A/B phase) and display with high speed, counting, control and communication (Modbus RTU mode) of Pulse from encoder, proximity switch, photo switch or flow meter for counting, length and position control. There are 3 external control input (DI) in standard and the optional 4 Relay, 1 Analogue, and RS485 port available.

    The relays are also support N, C, R, E mode and Hi/Lo energized for batch / totalizer and position control.

CS2-RS

    CS2-RS Resistance Indicator has been designed with high accuracy measurement, display and communication of Ohm (2 wire) as like as Coil of motor or transformer.

    ● The meter supports Field Calibration function. It can be calibrated with sensor (Resistance) to meet machinery structure.

    ● We build flexible function as like as 3 bank (for multi-range scaling and set point) and 3 external control inputs meet to various testing equipment inquiry.

    They are also building in 4 Relay outputs, 3 External Control Inputs, 1 Analogue output and 1 RS485(Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission and communication for a wide range of machinery and testing equipments applications.

CS2-PM

    CS2-PM Potentiometer Indicator has been designed with high accuracy measurement, display and communication of Ohm (3 wire) as like as Positioner.

    ● The meter supports Field Calibration function. It can be calibrated with sensor (Potentiometer) to meet machinery structure.

    They are also building in 4 Relay outputs, 3 External Control Inputs, 1 Analogue output and 1 RS485(Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission and communication for a wide range of machinery and testing equipments applications.

CS2-SG

    CS2-SG Strain Gauge Indicator has been designed with high accuracy measurement, display and communication of DC signal 0~1.0/~4.0mV or 0~10.0/~40.0mV as like as Load Cell or Strain Gauge.

    ● The meter supports Field Calibration function. It can be calibrated with sensor(Load Cell/Strain Gauge) to meet machinery structure.

    They are also building in 4 Relay outputs, 3 External Control Inputs, 1 Analogue output and 1 RS485(Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission and communication for a wide range of machinery and testing equipments applications.

CS2-T

    CS2-T Temperature Indicator has been designed with high accuracy measurement, display and communication of Thermocouple or Pt100Ω.

    They are also building in 4 Relay outputs, 3 External Control Inputs, 1 Analogue output and 1 RS485 (Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission and communication for a wide range of machinery and testing equipments application.

CS2-TM-Analogue

    The CS2-TM Totalizer controller provide high accuracy measurement, display, control and communication (Modbus RTU mode) of 0~10V/4~20mA from flow meter or mV from Shunt for Amp-Hour.

    There are two display screen and 3 external control input (DI) in standard and the optional 4 Relay, 1 Analogue, 1 Pulse and RS485 port available. They are also support fantastic control function as like as N, R, C mode for totalizer and batch control.

CS2-TM-Pulse

    The CS2-TM(Pulse Input) is innovation totalizer.

    ● Adtek builds in high technology with wide input range from 0.01Hz~ 140.00KHz with auto-range function at same unit. There are three setting modes for K factor, 1/K factor and flow speed to match the difference output description of flow-meters.

    The Totalizer provides high accuracy measurement, display, control and communication (Modbus RTU mode) of Pulse from Flowmeter or encoder, proximity switch, photo switch for length control.

    There are two display screen and 3 external control input (DI) in standard and the optional 4 Relay, 1 Analogue, 1 Pulse and RS485 port available. They are also support fantastic control function as like as N, R, C mode for totalizer and batch control.

CS3-PR

    CS3-PR Process Indicator has been designed with 0~10V and 4(0)~20mA high accuracy measurement.

    A compact body design for small equipment, laboratory instrument, and others.

    Also are available with relay output, analog output, RS485 Modbus RTU communication to cover a wide range of applications.

CS3-RS

    CS3-RS Resistance Indicator has been designed with high accuracy, display, control, remote communication.

    A compact body design for small equipment, laboratory instrument, and others.

    Also are available with relay output, analog output, RS485 Modbus RTU communication to cover a wide range of applications.

CS3-PM

    CS3-PM Potentiometer Indicator has been designed with high accuracy, display, controller, remote communications

    A compact body design for small equipment, laboratory instrument, and others.

    Also are available with relay output, analog output, RS485 Modbus RTU communication to cover a wide range of applications.

CS3-SG

    ( Not available yet, to be launched) 

    CS3-SG Strain Gauge Indicator has been designed with high accuracy measurement, display and communication of DC signal 0~1.0/~4.0mV or 0~10.0/~40.0mV as like as Load Cell or Strain Gauge.

    ● The meter supports Field Calibration function. It can be calibrated with sensor(Load Cell/Strain Gauge) to meet machinery structure.

    They are also building in 2 Relay outputs, 1 External Control Input, 1 Analogue output or 1 RS485(Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission or communication for a wide range of machinery and testing equipments applications.

CS3-RL

    CS3-RL indicator was designed with high accuracy measurement of pulse and frequency.

    The innovation feature is input from 0.01Hz~100KHz the display resolution will auto-range according input frequency to shift decimal point.

    A compact body design for small equipment, laboratory instrument, and others.

    Also are available option relay output, analog output, RS485 Modbus RTU communication for most popular applications.

CS3-TR

    CS3-TR Temperature Indicator has been designed with Pt100 (3 wire) high accuracy measurement.

    A compact body design for small equipment, laboratory instrument, and others.

    Also are available with relay output, analog output, RS485 Modbus RTU communication to cover a wide range of applications

CS3-TC

    CS3-TC Temperature Indicator has been designed with high accuracy measurement.

    A compact body design for small equipment, laboratory instrument, and others.

    Also are available with relay output, analog output, RS485 Modbus RTU communication to cover a wide range of applications.

CS3S-PR

    ● Measuring: 0~20mA/0~10V

    ● Accuracy: ±0.1%

    ● Display range: -1999~9999

    ● Dimension: 1/32 DIN (48x24mm)

    ● High stbility and reliability

CS3S-TR

    ● Measuring: Pt100/Pt1000

    ● Accuracy: ±0.1%

    ● Display range: -1999~9999

    ● Dimension: 1/32 DIN (48x24mm)

    ● High stability and reliability

TB Series

    ● Measuring T/C, Pt100Ω, Process signal mA, Vdc

    ● Accuracy: ±0.25% of full scale

    ● 4 Digital display: -1999~9999

    ● Automatic / manual output in standard

    ● Heating / Cooling control output available in option

    ● Analog re-transmission function option

    ● Outside dimensions is 1/4, 1/8, 1/16 DIN

    ● High stability & low cost

TC series

    ● Measurement T/C, Pt100Ω, Process signals mA, Vdc

    ● Accuracy: Full scale ±0.5%

    ● 4-digit display;Display range: -1999~9999

    ● Standard with automatic / manual output

    ● Optional heating / cooling control output

    ● Optional analog signal transfer function

    ● Dimensions can chooseDIN 1/4, 1/8, 1/16

    ● High stability and low cost

X
Member Login

Forgot your password?
X
Login

Forgot your password?