HOME  /  PRODUCTS  /  Signal Converter  /  Isolator, Transmitter, Splitter
Isolator, Transmitter, Splitter
MT-RTD

     FEATURE

     

    ● Pt100Ω -100~800℃ Input 4 Ranges Programmable by dip switches,

    easy maintain and save stock

     

    ● 6 Popular Output Ranges Programmable by dip switches

     

    ● Low cost and high stability

AT-FD

    ● Able to additionally purchase dip switches providing 6 kinds of output signals, 0~5V/ 0~10V/ 1~5V/ 2~10V/ 4~20mA/ 0~20mA

     

    ● Complete isolation for different output signals

     

    ● Equipped with LED light of power, input, and output

     

    ● Offer a wide range of input frequency, 0.1Hz~50KHz

     

    ● lightweight appearance: isolation converter, 17.5mm width; DIN rail, 35mm width

     

    ● CE Approved & RoHS

AT2-TC

    AT2-TC Temperature(TC) Converter adopts MCU digital design. The thermocouple input type and temperature range of the converter can be changed through the setting software (AT2TC-Utility). It has both the flexibility of digital use and the convenience of analogy. Mainly used for conversion and

    isolation of temperature measurement.

    This section slim design of the converter / distributor, in addition to providing two groups of signal output (Isolation) or 24V excitationsupply for the transmitter used, the switching power supply willprovide installation convenience. The top and designed power supply, input and output indicators and removable terminal blocks to facilitate on-site construction and working status view.

     

    ■Features

    • The high-precision temperature IC is used to make the ambient temperature compensation error value of the
    • isolation converter in the full temperature range of operating temperature less than ±0.5℃
    • Output for 0~5V / 0~10V / 1~5V / 2~10V / 4~20mA / 0~20mA changeable by dip switches and terminals
    • 100mS high-speed response signal output, suitable for precision temperature control loop
    • Dual different signals output available
    • LED indications for power, input and output status
    • The width of the isolation converter is only 17.5mm, and the installation method of standard 35mm rail
AT Series

    AT series converter / distributor primarily designed for use in the general signal conversion and isolation circuit;as 4~20mA、0~10V、Thermocouple(Type K, J, E, T), Rtd (Pt100Ω), Load Cell, Potentiometer and AC Voltage/Current…, Complete models

    This section slim design of the converter / distributor, in addition to providing two groups of signal output (Isolation) or 24V excitationsupply for the transmitter used, the switching power supply willprovide installation convenience. The top and designed power supply, input and output indicators and removable terminal blocks to facilitate on-site construction and working status view.

MT-VI

    ● 6 Popular Input and Output Ranges Programmable by dip switches

    ● Changeable Input Module Between V/mA , Potentiometer, Strain Gauge, easy maintain and save stock

    ● Dual difference signal output available

MT-CL

    ● 6 Popular Output Ranges Programmable by dip switches

    ● DC 4~20mA input, easy maintain and save stock

    ● Low cost & high stability

MT-RT

    ● Measures 3 Wire Potentiometers and 2 Wire resistances

    ● 2 Pot Ranges and 4 two wire Resistance Range Programmable

    ● 6 Popular Output Ranges Programmable by dip switches

    ● Low cost and high stability

MT-SG

    ● 6 Popular Output Ranges Programmable by dip switches

    ● Load cell: 0 ~ 40.0mV / V ,4 range input by the DIP switch, easy maintain and save stock

    ● Low cost & high stability

MT-FD

    ● 10 popular Inputs and 4 popular Output (Programmable by dip switches)Ranges

    ● Modular Design, Easy Maintain and Save Stock;

    ● Changeable Output Module Between V/mA, Trip Relay with difference programming module

    ● Dual difference signal output available even for trip relay

    ● Low cost & high stability

MT-DA

    ● 4 Popular Input Ranges Programmable in One

    ● Modular Design, Easy Maintain and Save Stock;

    ● Dual trip relay output available

    ● Low cost and high stability

MT-DF

    ● 4 popular Input and 8 Output Ranges Programmable by dip switches

    ● Dual isolated output is available

    ● Low cost and high stability

MT-FF

    ● 8 Outputs Range Programmable by dip switches

    ● Modular Design, Easy Maintain and Save Stock;

    ● Dual pulse output available

ST-VA

    ● Measuring Voltage or Current for DC / AC / TRMS

    ● Accuracy: ± 0.04% or ± 0.1%; Display range: -19999~29999

    ● User function, easily programmable via the top panel

    ● 1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection in 3 outputs

    ● Design by CE standard

ST-PR

    ● Measuring linear signal 0~10V / 0(4)~20mA in one controller

    ● Accuracy: ± 0.04%; 4 1/2 Digital display: -19999~29999

    ● User function, Easily programmable via the front panel

    ● 1 Analogue output, 1 RS 485 port, 3 Relay and Excitation Supply output available for multi-cross selection in 3 outputs

    ● CE Approved

ST-RS

    ● Measuring resistance from 0~200Ω/2000Ω/20.0KΩ/200.0KΩ(2 Wire)

    ● Accuracy: ± 0.04%; Display range: -19999~29999

    ● User function, Easily programmable via the front panel

    ● Field calibration with resistance to meet the system requirement 

    ● 1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection 3 outputs at most.

    ● CE Approved

ST-PM

    ● Measuring potentiometer from 0~50Ω/~2.0KΩ; 0~2.0KΩ/~100.0KΩ (3 wire)

    ● Accuracy: ± 0.04%; Display range: -19999~29999

    ● User function, Easily programmable via the front panel

    ● Field calibration with potentiometer to meet the system requirement

    ● 1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection 3 outputs at most.

    ● CE Approved

ST-SG

    ● Measuring Stain Gauge signal range 0~1.0/~2.0/~4.0/~10.0/~20.0/~40.0mV/V specify

    ● Accuracy: ± 0.04%; Display range: -19999~29999

    ● User function, easily programmable via the top panel

    ● Calibration with Strain Gauge in the field capability

    ● 1 Analogue output, 1 RS 485 port, 3 Relay output and Excitation supply available for multi-cross selection in 4 outputs

    ● CE Approved

ST-RL

    ● Measuring Frequency AUTO RANGE 0.01Hz~100KHz / ~140KHz(optional) / Contact, NPN, PNP, Voltage pulse, Sine wave 30~600Vp

    ● Accuracy: ± 0.005%; Display range: 0~99999

    ● Decimal Point auto moving according to input frequency

    ● User function, easily programmable via the top panel

    ● 1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection 3 outputs at most

    ● CE Approved

ST-LC

    ● Measuring 2 channels 0~10V / 0(4)~20mA or 0~10.0mV/~100.0mV and single display screen with Mathematic function Addition / Subtraction / Multiplication / Division / high or low selector

    ● Isolated between input 1, input 2, output and power

    ● Plug-in conditioner with display and operating key

    ● Accuracy: ± 0.04%, Display range: -19999~99999

    ● 1 Analogue output, 1 RS485 port and 1 Relay output available for multi-cross selection 2 outputs at most.

ST-T

    ● Measuring RTD: Pt100Ω; Thermocouple: K, J, E, T, R, S, B

    ● Accuracy: RTD: ± 0.1%; Thermocouple: ± 0.2%

    ● User function, easily programmable via the top panel

    ● 1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection 3 outputs at most.

    ● CE Approved

SD-PR

    ● Input signal for 4~20mA(with excitation supply available)

    ● Output 4~20mA with loop powered, self powered or auxiliary powered available

    ● DIN rail mounting with Ultra slim in 7.6 mm profile

    ● CE Approved & RoHS

SD-CL

    ● Input signal for 4~20mA(with excitation supply)

    ● Output 4~20mA wire mode with loop powered,

    ● DIN rail mounting with Ultra slim in 7.6 mm profile

    ● CE Approved & RoHS

SD-T

    ● Input Type and range programmable for RTD Pt100Ω; Thermo-couple type K, J, E, T, R, S, B

    ● Output 4~20mA with loop powered or auxiliary powered available

    ● DIN rail mounting with Ultra slim in 7.6 mm profile

    ● CE Approved & RoHS

TT

    ● Accuracy: T/C: 0.3% Pt100Ω: 0.15%

    ● Wide selection of input with difference sensor type & range

    ● Dimension small

    ● Low output ripple

    ● High stability & low cost

TTX

    ● Input Type and range programmable for: RTD Pt100Ω; Thermo-couple type K, J, E, T, R, S, B

    ● Output temperature range can be configured by software (Must accompany by programming cable)

    ● 4~20mA Output(2-wire) with loop powered

X
Member Login

Forgot your password?
X
Login

Forgot your password?